| RS232 |
Serial communication. Specify the type of the cable or instrument. |
| LAN |
Network communication. Specify the type of the cable or instrument. |
| USB |
USB communication. Specify the type of the cable or instrument. |
| GPIB |
hardware: Interface card for older Agilent 1100 system, Part No.: IAG11 (PCI interface) or IAG12 (USB interface) |
| GSIOC |
hardware: Converter for Gilson serial communication, Part No.: IGLN1 |
| CB20 |
hardware: Internal (PCI) LC Control card (4x D/A & 4x D/F converter), Part No.: A27 |
| Zebrick |
hardware: External LC Control device (4x D/A & 4x D/F converter), Part No.: B30 |
| OPT-USB |
hardware: Optical to USB converter, Part No.: OPT01 |
| A/D converter |
hardware: A/D converter is needed to gather data because the instrument does not support digital acquisition. Part No.: U31, U32, U34 |
| I/O device |
hardware: Device capable of sending and receiving TTL signals governed by Clarity, for example any DataApex A/D converter. Part No.: U31, U32, U34 |
| LC UNI |
software: Universal LC control module for online pumps, Part No.: A24 |
| FC GP |
software: General Purpose Fraction Collector control module for Clarity, Part No.: A24 |
| UNI RUBY |
software: Universal control module for various instruments, Part No.: A24 |
| ICF |
software: Agilent ICF control Libraries embedded in Clarity, Part No.: A24, A26, A29 depending on the controlled modules |
| 1 Developed by instrument's producer. |
| 2 Exclusively available from the instrument's producer – needs a release code. |
| 3 Exclusively available from the instrument's producer in the particular OEM version. |
| 4 Exclusively available in selected territories through companies approved by Shimadzu company. |
| 5 Developed by third party. |
| 6 Only models with Firmware 5.11 and lower. |
| 7 Only limited number of these systems on one Clarity station is possible - see appropriate manual or product page. |
| 8 Available from Dalian Elite company only (in the W5100 OEM version). |
| 9 Exclusively available in selected territories through companies approved by Hitachi company. |
| 10 One module in the system must have Interface Card installed. |
| 11 With limitations, contact support@dataapex.com |
| 12 The G1315A, G1315B, G1365A, G1365B sub-types only. |
| 13 Selected models only - Check with Elysia-raytest company. |
| 14 Available from Knauer company only (requires Knauer FRC option). |
| 15 Only models with serial option - Check with Sedere company. |
| 16 Only the detectors sold by Knauer company. |
