Instruments supported by Clarity

A Instruments with analog outputs

(see complete list of supported instruments)

Only local instrument control and monitoring (via keyboard and display) is possible.
In case you cannot find your instrument, please contact us.

Not sure about the differences between digital and analog? Please, see our FAQ.

Analog GCs AAnalog acquisition  Back
Producer Name Interface Status
Analog HPLC Detectors AAnalog acquisition  Back
Producer Name Interface Status
Analog Amino Acid Analyzers AAnalog acquisition  Back
Producer Name Interface Status
Analog Elemental Analyzers AAnalog acquisition  Back
Producer Name Interface Status

Interface types:
software: Agilent ICF control Libraries embedded in Clarity, Part No.: A24, A26, A29 depending on the controlled modules
software: General Purpose Fraction Collector control module for Clarity, Part No.: A24
software: Universal LC control module for online pumps, Part No.: A24
hardware: A/D converter also capable of sending and receiving TTL signals governed by Clarity. Part No.: U31, U32, U34
hardware: Interface card for older Agilent 1100 system, Part No.: IAG11 (PCI interface) or IAG12 (USB interface)
hardware: Converter for Gilson serial communication, Part No.: IGLN1
hardware: Optical to USB converter, Part No.: OPT01
hardware: External LC Control device (4x D/A & 4x D/F converter), Part No.: B30
software: Universal control module for various instruments, Part No.: A24
LAN
Network communication. Specify the type of the cable or instrument.
RS232
Serial communication. Specify the type of the cable or instrument.
RS485
Serial communication. Specify the type of the cable or instrument.
USB
USB communication. Specify the type of the cable or instrument.

Notes:
1 Control for compatibility with obsolete communication method.
2 Developed by instrument's producer.
3 Exclusively available from the instrument's producer – needs a release code / connection key.
4 Exclusively available from the instrument's producer in the particular OEM version.
5 Developed by third party.
6 Exclusively available in selected territories through companies approved by Shimadzu company.
7 Only models with Firmware 5.11 and lower.
8 Exclusively available from standalone installer.
9 Exclusively available in selected territories through companies approved by Hitachi company.
10 One module in the system must have Interface Card installed.
11 Only limited number of these systems on one Clarity station is possible - see appropriate manual or product page.
12 With limitations, contact support@dataapex.com
13 Selected models only - Check with Elysia-raytest company.
14 Limited to certain OS versions, see product page for details.
15 Only models with serial option - Check with Sedere company.
16 Only models with 840.100 firmware family (manufactured after 2010).
17 Available from Knauer company only (requires Knauer FRC option).