home
 
 

FAQ

Method setup - Event table is corrupted after changes in detectors (instruments) configuration used in it or after changes in PC's HW.

The Event Table (especially the Output column) may be corrupted after changes in the instruments' configuration (detector name, order of assigned detectors, etc.) used in it or after some changes in PC's hardware. In such case, it is necessary to adjust the Event Table.

Send comment8.9.2010
 

Go back  Back to: FAQ
 
Facebook Twitter Youtube  DataApex Clarity
Downloads
HTML navigation
Sitemap
Print
Last updated: 2019-05-14 | webmaster