SofTA ELSD Control

Softa ELSD

The SofTA ELSD Control module allows for direct control of the SofTA 200s, 300s, 400, 1200, 1300, 1400 ELSD (evaporative light-scattering) detectors, as well as their OEM variants. The control module allows the digital acquisition on one signal. The user can easily create the detector control method from the Method Setup - Acquisition tab, where a wide range of signal parametres may be set. All of these parameters are then saved as a part of the method and can be added as a part of the report. Control is realized via a standard PC serial port using a specified serial cable. To allow the start synchronization with other instruments, the Digital Input Device (p/n DID01) is needed.

Next steps


SofTA ELSD Control
Controlled instruments 200s, 300s, 400, 1200, 1300, 1400

Communication interface RS232

Purchasing LC Control (p/n A24)

Related products Clarity (p/n C50)
Digital Input Device (p/n DID01)

Cable Serial straight DB9F-DB9M (p/n SK02)

Related software

See also

Linkedin Facebook Twitter Youtube  DataApex Clarity
HTML navigation
Last updated: 2020-06-06 | webmaster