Shodex RI-101 Control

Shodex RI-101

The Shodex RI-101 Control module allows for direct control of the Shodex RI-101, RI-102 and RI-104 detectors. It is performed using the UNI Ruby control module using the appropriate control script.
The control module allows the digital acquisition of one detector signal. The user can easily create the detector control method from the Method Setup - Acquisition tab, where a wide range of signal parametres may be set. All of these parameters are then saved as a part of the method and can be added as a part of the report.
Control is realized via a standard PC serial port using a specified serial cable.

For proper operation of the control module firmware version 1.06 or higher is required.

Next steps


Shodex RI-101 Control
Controlled instruments RI-101, RI-102, RI-104

Communication interface RS232

Purchasing LC Control (p/n A24)

Related products Clarity (p/n C50)

Cable Serial straight DB9F-DB9M (p/n SK02).

Profile ShodexRI101Det.rb

Related software

See also

Linkedin Facebook Twitter Youtube  DataApex Clarity
HTML navigation
Last updated: 2020-11-26 | webmaster