The title "Simulated" is displayed in the Data Acquisition window.

The corresponding instrument displays only the simulated curve or has a so-called DEMO detector driver allocated instead of the data acquisition driver. Meaning that the signal is not real but simulated from a data file. The reason for the watermark "Simulated" could be one of the following:

  • Either you have a demo detector allocated on that instrument. Check your configuration, remove the demo detector and allocate the needed control module.
  • You might have installed the Clarity Demo version which does not allow real-time acquisition. Go to our download section and download a full version. Note that you need to be registered with the S/N of the station and during installation, you will need to insert a correct User code, otherwise Clarity will not start.
 10.10.2003