INT7 or INT9 board driver does not work properly. How can I reinstall it?

During installation on Windows 7 on some computers the driver pre-installation fails and when Clarity starts "Incompatible Device Driver" INT7/INT9 is reported. Similar situation may occur for example when the INT7 or INT9 board is inserted into PC before the Clarity and drivers are installed.

In such cases manual re-installation of the drivers may help. The procedure is described in detail in corresponding board manual:

Locate section Troubleshooting and chapter Manual Installation (chap. 5.3). Follow the instructions regarding your operating system.

Send comment16.12.2010

Go back  Back to: FAQ
Linkedin Facebook Twitter Youtube  DataApex Clarity
HTML navigation
Last updated: 2020-10-07 | webmaster