home
 
 

Ecom ECDA2000 Control

Ecom ECDA2000

The control module enables direct control of the Ecom ECDA2800 UV-VIS PDA detector over USB or LAN. The user can easily create the detector control method from the Method Setup - Acquisition and Method Setup - PDA tabs. All of the detector method parameters are then saved and can be added as a part of the report. Actual signal of the detector can be monitored and partly controlled from the Device Monitor window. Control is realized via standard PC serial port using the specified cable (based on communication type selected).
The control moduel was developed by ECOM company, any further information, including the control module manual, may be obtained from ECOM company.

ECOM | HPLC from Prague

Specification


Ecom ECDA2000 Control
Controlled instruments Ecom ECDA2800 UV-VIS PDA detector

Communication interface USB or LAN

Purchasing LC Control (p/n A24)

Related products Clarity (p/n C50)
PDA Extension (p/n A29)

Cable USB A-B (p/n SK06) in case of serial interface (Virtual COM Port)
or
LAN Cross (p/n SK08) in case of LAN interface

Related software

See also

 
Facebook Twitter Youtube  DataApex Clarity
Downloads
HTML navigation
Sitemap
Print
Last updated: 2016-12-16 | webmaster