How to recover acquisition data after Clarity crashes or freezes?

During acquisition, data are stored in the temporary directory (...\TMP\ $ch1run.raw file ). The data are stored from memory to disk in approximately 1 min intervals. In case the Clarity crashes/freezes during a run, the up to that moment acquired data could be recovered using the Data Recovery ...  command from the Single Analysis window. Note the chromatogram will be created according to the method and parameters specified in the Single analysis (file name and processing parameters), which may be different from the ones used in the Sequence.

Recovery Data Single AnalysisRecovery Data

During the freeze, it will depend if the thread collecting and storing the data to disk will be still active, with a crash, the data to the last minute before the crash could usually be recovered. In case the computer freezes often, it will be advisable to investigate the cause and try to find a remedy – please do not hesitate to send us the respective diagnostic files. A Memory dump may be helpful for such situation.

 01.08.2018