Single Analysis dialog

Analysis Procedure: Step 1 -> Step 2 -> Step 3 -> Step 4 -> Step 5

Use the Single Analysis icon in the Instrument window to open the Single Analysis dialog.

Single Analysis dialog

  • Fields in the Analysis tab carry the information about the sample. All necessary parameters are already set for you, but we will browse through them nonetheless.
  • Sample ID and Sample fields ① are purely informational and can be propagated to chromatogram name, whereas the data in Amount, Dilution, ISTD Amount and Inj. Volume fields ② are used for further calculations.
  • Choosing the Standard from the Sample Type drop-down ③ would mark this sample as a calibration standard and save the chromatogram into the CALIB subdirectory. Filling a value in the Level field would also automatically fill this chromatogram to the calibration which is linked in the used method.
  • The measurement of the sample will be performed according to the template method selected in the Method field. Method can be selected by using button. The Edit Method... button ④ serves to change the parameters of the selected template method. Click the button to open the Method Setup dialog and check the setting of the Autostop parameter (Autostop is enabled and Run Time is set to 7.5 minutes). Return to the Single Analysis dialog by pressing OK button.
  • The Chromatogram File Name field ⑤ serves to enter the file name of the resulting chromatograms. It is possible to use plain text together with variables adding the time, date, sample ID or other parameters to create unique chromatogram name. The resulting name can be seen just above the field ⑥ in parentheses.

Note:

The complete set of available variables can be seen after clicking in the field and selecting the icon.