PerkinElmer NexION Control

PerkinElmer NexION

PerkinElmer NexION ICP-MS detector driver can control PerkinElmer NexION 300, 350, 1000, 2000 and 5000 detectors. Clarity can communicate with the detector through Syngistix software installed on the same PC. User can easily create the detector control method from the Method Setup - Acquisition tab. All of the detector method parameters are then saved and can be added as a part of the report. Actual signal of the detector can be monitored and partly controlled from the Device Monitor window.

Aside from NexION detector, Clarity also allows control of the whole NexSAR system, consisting of NexSAR autosampler, pump, column oven and switching valve. On the other hand, it is possible to use any other HPLC system along with the NexION detector.

The control module was developed by PerkinElmer company, any further information, including the control module manual, may be obtained from PerkinElmer company.

PerkinElmer ICP-MS


PerkinElmer NexSAR system control
Controlled instruments

PerkinElmer NexION 300, 350, 1000, 2000, 5000

PerkinElmer NexSAR Inert HPLC Autosampler, NexSAR pump, NexSAR Column Oven, NexSAR Switching valve

Communication interface LAN for NexION (through Syngistix software)
RS232 for other NexSAR system components
Purchasing LC Control (p/n A24)
AS Control (p/n A26) - optional
Related products Clarity (p/n C50)
Connection cross LAN (p/n SK08) for NexION

Related software

See also

Linkedin Facebook Twitter Youtube  DataApex Clarity
HTML navigation
Last updated: 2021-07-19 | webmaster