Applying a GPC calibration to a chromatogram

If the calibration file is not assigned to the template method, the measured chromatogram will not have it linked either. To link a calibration file to a chromatogram do as follows:

  1. Switch to the GPC Results tab ⓐ at the bottom part of the Chromatogram window.

  1. To link the calibration file to the Chromatogram, click the Set… button ⓑ, so that the Open GPC Calibration dialog window will emerge. You can select calibration file from your current project or you can navigate to other folders.
  2. Select the desired calibration file from the list and click OK.
  3. Check that the Calibration File (Peak Table) field contains the name of the calibration file ⓒ.

    4. Note:

    When no calibration file is linked to a chromatogram, the field Calibration File (Peak Table) contains inscription (None).

  4. Save the chromatogram by selecting File - Save or clicking on ⓓ.