Trial Expired
Clarity does not accept the User Code. There may be two reasons for this error.
▌Reason 1: Your Clarity station just ended its trial period.
Solution:
a) Enter the correct User Code, which switches Clarity from trial into full mode ①.
b) Switch to section ② and enter the trial prolongation code to continue with trial mode. Trial prolongation codes must be requested from your distributor or DataApex.
Once a correct User Code or trial prolongation code has been supplied, click on the OK button to start Clarity.
▌Reason 2: The file clarity.sno is empty or missing by an error.
Solution:
Same as for Reason 1.