Running the Sequence measurement

Analysis Procedure: Step 1 -> Step 2 -> Step 3 -> Step 4 -> Step 5

Sequence operation allows automated measurement of large number of samples for chromatographs equipped with autosamplers. Clarity provides the possibility to select an ACTIVE (start controlled by the station) or PASSIVE (start controlled by the autosampler) sequence. It is also possible to re-process already measured sequences.

Note:

It is not necessary to have the AS Control module to use the autosampler; start synchronization can be performed even without it. However, the control module can add direct control from Clarity for automated sending of vial positions, injection volumes, etc., without the need to program the AS itself.

This chapter and the Clarity demo project prepared on the Instrument 1 (named My GC + AS) will lead you through Sequence, Calibration and Method Setup windows used for automated measurement and preparation of template methods.