A/D Converters
Related Hardware
Related software
INT7 - PCI Board of A/D Integration Converters
INT7 is an internal 24-bit A/D converter board that measures the voltages of chromatographic and electrochemical detectors. It contains up to 4 data-acquisition channels on one board (one and two channel versions are also available). The channels are completely independent, sigma delta integrating A/D converters, used for processing positive and negative voltages. The board includes four digital inputs and eight digital outputs. The first four digital outputs are also equipped also with relay contacts. The board is manufactured using the SMT montage and provides excellent reliability and temperature stability.
Full size PCI 2.0, 32 bit PCI slot is required. Low profile or PCI Express slots cannot be used.
INT7 is the direct successor of our classic INT5 ISA card. The two share an identical analog channel design and thus, identical basic electric parameters.
Advantages of the INT7 A/D converter:
- No loss of input signal during integration. There are no time delays during which the converter fails to integrate the input signal.
- There is no continuous servicing of the input analog switches, which would otherwise cause errors (offset, noise, etc.).
- The amount of data entering the computer is substantially smaller, since individual data items already represent partial integrals.
Next steps
Technical data:
| INT7 | |
| Converter type | 24 bit integrating, delta-sigma integration |
| Analog inputs | differential |
| Number of channels | 1, 2 or 4 fully independent, mutually isolated |
| Input range | unipolar and bipolar, each channel independentely: 156, 1250 or 12560 mV |
| Input impedance | > 10 MOhm |
| Sample rate | 10, 25, 50, 100 Hz |
| Non-linearity | < 0.0015 % |
| Temperature dependence | < 10 ppm/°C |
| Digital inputs | 4 TTL (5 V), the first two can be controlled using the built-in opto-couplers |
| Digital outputs | 8 TTL (5V), maximum current load 20 mA), the first four control relays |
| INT7 | |
Effective resolution for various acquisition speeds and input ranges:
| 10 V | 1 250 mV | 156 mV | |
| 10 Hz | 20 bit | 19 bit | 16 bit |
| 50 Hz | 18 bit | 17 bit | 15 bit |
| 100 Hz | 17 bit | 15 bit | 14 bit |
| 10 V | 1 250 mV | 156 mV | |
Possible combinations:
| WIN XP | WIN 2000 | WIN NT | Win 98, Me | |
| INT7 |
Clarity Clarity Lite CSW32 |
Clarity Clarity Lite CSW32 |
Clarity CSW32 |
Clarity (until 2.4.1) CSW32 |
| WIN XP | WIN 2000 | WIN NT | Win 95, 98, Me |




