Download

Related hardware

Related software

See also

Quick links

Agilent 5890 Control

Agilent 5890 The Agilent 5890 GC driver can control Agilent (formerly HP) 5890A and 5890 Series II chromatograps.
The control is performed over HPIB interface card. The boards supplied by Agilent (see the compatibility table) or the board supplied by DataApex (p/n IHP 58) can be used. The control of the attached autosampler has to be purchased separately, see the AS Control module (p/n A26) for 7673. For details about required parts and cables read the manual.
The control module does not support EPC, FPD and Analog Input Board (19261-60010).

Next steps

Specification

Agilent 5890A and Agilent 5890 II GC Control
Communication interface RS232
Purchasing GC Control (p/n A23)
Related products Clarity (p/n C50)
Cable Serial cross DB9F-DB25M (p/n SK03) + INET cable

Control Board compatibility

Control Status Description
19257-60015
HPIB/RS232		 OK Newer type; working; both analog outputs supported.
Can be supplied by DataApex as a part of the IHP58 kit.

19257-60010
HPIB/RS232		 OK Tested in DataApex.
Older type; working; only one analog output is supported

19242-60010
INET		 No commonly used with integrators, cannot be used

19242-60015
INET		 No commonly used with integrators, buffered communication, cannot be used

19242-60030
RS232		 No RS232 board only, uses different communication protocol, cannot be used